Rear sets

I removed all the stock footpegs, foot controls and brackets/plate/support.
I made two triangle shaped support plates from Naval quality aluminium.
Attached them to the frame as you can see.
I used complete stock rearsets assembly from a '94 Yamaha YZF750R.
One mounting point on the aluminium plate, the other on the frame.
I made an extra hole in the custom plates to alter the footpegs position further back if wanted.
I rebuilt the stock YZF750 Brembo rear brake master cylinder and gave it an slight buff for extra shine.
I made the brake fluid reservoir from one of those cheap aftermarket fuel filters. Think it looks good enough.